How to Make Shower White Again

How to Make Shower White Again? Easy Method Explained for 2023

Spread the love

It is very hard to keep the bathroom or the shower spick and span all the time. No matter how much we scrub the floors, those yellow stains do not seem to budge at all.

In those situations, it may be very hard to believe me when I say that we can actually make our showers white again.

Indeed, the following article will help you understand how to make shower white again.

So, let’s get on with it!

First things first, you must know that most shower places are made of fiberglass.Fiber glasses have a glass base thathas been mixed with resin. It is very susceptible to soap scum, and therefore itneeds to be cleaned often so that it doesn’t lose its shiny and glossyexterior. Thus, you must clean your shower properly for it to retain or regainits white color.

Know-How To Make Shower White Again

Know-How To Make Shower White Again

  • Rinse your fiberglass shower with hot water: Doing so will remove any built-up grime or dirt on the surface of the shower.
  • Use hot water to create steam in the shower: This way, you will help loosen any stubborn grime so that when you rinse next, you can easily get those out of your fiberglass shower.
  • Then ventilate the steam from the shower.

Proceed to scrub: Use a soft sponge to scrub. Dip the sponge into a cleaning liquid like Bring it On Cleaners or Mr. Clean Clean Freak Mist. Thengently scrub the floors and walls of the shower to remove grimes.

Thisway, you will most likely have removed filth and yellowing stains; however, ifit is not possible for you to purchase thecleaning products, then worry not because we have some handy homeremedies for you as well.

You may use the following remedies to make your shower white again:

You may use the following remedies to make your shower white again

1. Use Vinegar or Vinegar Solution: You may use vinegar in your shower without worrying about damaging it. Therefore, you can simply rinse your shower with hot water at first and then spray vinegar all over the shower. Then let the vinegar sit on the surfaces of the shower for 10-15 minutes before washing it away with clean, warm water.

2. Use Baking soda paste: Another way to clean and whiten your shower place is by applying baking soda paste to it. In order to do this, you must first make the paste using baking soda and water. Make sure that the paste is thick. Then apply the baking soda to the shower using a brush or a wet

You will have to let the paste sit on the surfaces for more than an hour before washing it away with water. Repeat the process if the stains or filth remain.

3. Use Acetone or Turpentine: You may use acetone or Turpentine to remove stubborn and sticky grime or stains from your fiberglass shower. In order to clean in this way, make sure you have a glove on. Next, use a rag to apply the solutions to the places needed and wait. You will have to wait for a while before wiping it away with a wet cloth.

Use this method as a last resort, and that too, only on surfaces that require more elbow grease. This method is more suitable for use on surfaces made of plastic.

Use citric acid: A citrus rub is a great way of removing mild discoloration of your fiberglass shower as well as bad odor. For this method, you will need to do the following:

  1. a) Apply baking soda to a half-cut lemon
  2. b) Scrub the half-cut lemon into the fiberglass to remove the stains
  3. c) Let the solution dry on the fiberglass for 30 – 40 minutes
  4. d) Wash it away with warm water and then dry using a microfiber cloth

4. Use hydrogen peroxide: In order to clean your shower using hydrogen peroxide, first, make sure to make a solution using 1 cup hydrogen peroxide and 2 cups water. Then apply it all over your shower place and let it soak for 12 hours or so. Then wash it away and wipe using a wet rag.

Themethods given above will help you remove grime and stains from your showerfiberglass in the most cost-efficient way. It must be noted that you must notuse bleach in your fiberglass shower, and you must refrain from scrubbing toohard as otherwise, you will run a risk of damaging your shower further.

Now,if you have a bathtub in your shower place, you may need to do the following tomake your bathtub spotless and white:

  • Rinse your bathtub with warm water.
  • Next, pour dishwashing soap all over the bathtub
  • Make a vinegar solution using vinegar and water. Then microwave it for 90
  • Then spray the vinegar solution all over the soapy bathtub.
  • Then add baking soda to the bathtub.
  • Then scrub the bathtub with a soft
  • Let the mixture of soap, soda, and vinegar sit in the tub for 30 Then wash it away with water. Then wipe and pat dry with a microfiber cloth.

FAQ

1. How can I remove mildew from my shower?

In order to remove mildew and mold from your shower, you will have to scrub that exact spot with chlorine bleach. Afterward, let thebleach sit in the affected area before washing it away.

2. How to remove grime from the shower head?

At first, you will have to remove the showerhead and place it inside a plastic bag containing white vinegar. Then let the shower head soak in that white vinegar for 30 minutes before washing it away with water. Thensimply refit it in its place.

Final Words

How to Make Shower White Again

Inshort, you will need to put a lot of elbow grease and time into cleaning andto make your shower white again. However, the given guidelines on how to make shower white again will help make sure a white shower. Indeed, so long you’re not usingbleach with your cleaning products, and you are not scrubbing too hard, you aregood to go!

Related Post:

1. You can check our review on Cleaner for Hard Water Stains In Toilet.

2. For more must-have products Jacuzzi Tub Cleaner.

Related Posts