In the world of vehicle maintenance, the biggest mechanical failures are caused by small and silly issues. And one such issue is the common problem of the dirty mass air flow sensor.
Mass air flow sensors are an important part of a car for fuel injection and ignition systems. But it does not operate when it gets dirty due to air flow and consumption. Because when the mass air flow gets dirty, it reports incorrect readings to your engine, which messes up the air-fuel mixture and ignition time. That’s why the best MAF sensor cleaner is needed.
In this article, we will explore the symptoms of a dirty MAF sensor, the necessity of keeping it clean, and we will conclude with a list of the MAF sensor cleaners on the market.
MAF Sensor Cleaner Review
If you have a defective MAF sensor, it may need to be cleaned instead of replaced. And in this segment, we will suggest to you some of the best MAF cleaners that will eliminate grease and dirt from your engine.
1. CRC 05110 MAF Sensor Cleaner | Plastic Safe
The popular air flow sensor cleaner collection is incomplete without the CRC MAF sensor cleaner. It is a plastic safe MAF cleaner spray that dries in seconds.
CRC 05110 MAF cleaner improves the air/fuel ratio of the engine and increases horsepower. It is specially designed with advanced Cozol technology to improve the MPG of an engine. This product safely cleans the air flow sensor and makes the engine work better.
If you want a sensor cleaner to improve the fuel economy, you can try the Gunk MAF cleaner to clean the mass air flow sensor.
Features To Be Excited About
CRC 05110 MAF sensor cleaner is designed with advanced Cozol technology that helps to clean the sensor perfectly. It also increases horsepower and improves the MPG of the engine. CRC 05110 not only cleans but also protects the sensor.
Cons To Consider
We have not found any drawbacks in the CRC 05110 MAF sensor cleaner. It is satisfying its customers worldwide.
Key Features
- Increases horsepower
- Improves air/fuel ratio
- Plastic safe
- Dries in seconds
2. CRC 05610 MAF Sensor Cleaner | Dyno Proven
If you are looking for the original MAF sensor cleaner, you can consider the CRC 05610 MAF sensor cleaner for your mass air flow sensor. It safely cleans and protects the MAF sensor.
CRC 05610 is a dyno-proven sensor cleaner that increases fuel economy. It also increases the horsepower and air/fuel ratio that helps to keep the air flow sensor clean. In addition, CRC 05610 also reduces rough idle, hesitation, and pinging.
But if you want to try a highly effective cleaner that removes filter clogging build-up from the sensor, you should go for the K & N MAF sensor cleaner.
Features To Be Excited About
The special feature of the CRC 05610 MAF sensor cleaner is the ability to perfectly and safely clean the sensor. It is a plastic-safe cleaner spray that leaves no residue. This sensor cleaner also improves fuel economy and mileage.
Cons To Consider
CRC 05610 MAF sensor cleaner works well as a cleaner. But sometimes, the spray nozzle does not fit the spray head, and that’s why the contents get wasted. Otherwise, it is a good MAF sensor cleaner.
Key Features
- Reduces rough idle and hesitation
- Improves fuel economy and mileage
- Plastic safe
- Protects MAF sensor
3. Gunk MAS6 MAF Sensor Cleaner | Improves Performance
Are you looking for a sensor cleaner with performance improvement at the same time helps to save fuel efficiency? Then Gunk MAS6 is the best MAF sensor cleaner for you. It improves engine performance as well as fuel economy.
Gunk MAF sensor cleaner cleans the dirt and dissolves the grease and flux. It helps to reduce rough idles, hesitations, and other engine problems. It is a great cleaning kit that also restores engine performance.
If you are looking for an improved cleaner that improves the conductivity, you can go for the Hosa D5S-6 MAF sensor cleaner.
Features To Be Excited About
Gunk MAF cleaner is the toughest cleaner and degreaser. It improves the air/fuel ratio and restores engine performance. It also reduces rough idling and decreases hesitation.
Cons To Consider
We have not found any defects in the Gunk MAS6 MAF sensor cleaner. It is satisfying its customer through its features.
Key Features
- Reduces rough idles
- Improves Performance
- Restore engine power
- Dissolve dirt and grease
4. K & N MAF Sensor Cleaner | High-Effective
The cleaning process of K & N will probably be a factor in choosing the product for use. It is a powerful and highly effective degreaser that quickly dissolves filter build-ups.
K & N MAF sensor cleaner helps restore the filter performance by removing the filter-clogging build-up. It is a four-step air filter maintenance system that cleans any air filter perfectly. Also, it is very easy to use in heavy-duty air filters.
If you want a dyno-proven sensor cleaner that will also increase the engine horsepower, you should give a try the CRC 05610 MAF sensor cleaner.
Features To Be Excited About
K & N MAF sensor cleaner is a synthetic air filter cleaner that dissolves the dirt and grime build-up on synthetic filters. It restores the engine performance and renewed efficiency so your filter can work like new.
Cons To Consider
K & N MAF sensor cleaner is very easy to use, but the only thing is that it takes time to work properly. You have to wait for the cleaner to do its magic.
Key Features
- Restores Performance
- Includes power Kleen
- Restores air flow efficiency
- Highly effective degreaser
5. Hosa D5S-6 MAF Sensor Cleaner | Improves Conductivity
The Hosa D5S-6 is one of those cleaners that improves the conductivity of the MAF sensor of your vehicle. It is a fast-acting deoxidizing solution designed for use as a treatment for metal surfaces.
Hosa D5S-6 DeoxIT helps to clean and protect the sensor perfectly. It reduces intermittent connections, arcing, wear, and abrasion. It chemically improves electrical connections more than a sensor cleaner to ensure a clean sensor.
But if you are looking for a cleaner that will improve the air/fuel ratio of the engine, then the CRC 05110 MAF sensor cleaner is just for you.
Features To Be Excited About
The unique feature of the Hosa D5S-6 is it is a fast-acting contact cleaner. It is specially designed for general treatment for connectors, contacts, and other metal surfaces. It helps to reduce wear and abrasion also.
Cons To Consider
The only problem with the Hosa D5S-6 MAF sensor cleaner is you have to adjust the nozzle before using the cleaner spray. Otherwise, it will spread all over and get wasted.
Key Features
- Plastic safe
- Improves conductivity
- Improves electrical connections
- Reduces wear and abrasion
Frequently Asked Question & Answer (FAQ)
1. Does MAF sensor cleaner work?
Mass air flow sensor cleaners are designed for a safe and perfect cleaning process. So they work perfectly to clean the sensor for a better result in the engine.
2. What are the main symptoms of a dirty MAF sensor?
Dirty MAF sensor has some symptoms like rough idling, poor fuel economy, acceleration problem, hard starting, and many more. If you face this kind of problem in your vehicle, that would be a good time to clean the MAF sensor.
3. Can the MAF sensor cause misfire?
If a mass air flow sensor fails, it could give incorrect data to the engine computer. And that can cause a misfire in the engine. That’s why the sensor needs to check from time to time.
4. Which one is better to clean or replace a MAF sensor?
The mass air flow sensors can become damaged, but most of the time, they get dirty by doing their job. In this case, the sensor can be cleaned. But if there is some electrical or mechanical problem with the sensor, it should be replaced.
5. What to consider when choosing the best mass air flow cleaner?
Before choosing the right mass sir flow cleaner for your sensor, its air/fuel ratio maintenance is the main thing. Because the MAF sensor mainly works on fuel efficiency. That’s why it is important to consider first.
How To Trick A Mass Air flow Sensor?
MAF sensors are an important part of vehicles to detect any leak in the exhaust system. A single leak will trigger the MAF sensor and set off a light that pokes up from the dashboard. But there are ways to trick the MAF sensor.
If you want to trick the MAF sensor, you will need a unique metal tube. This tube has to be the same shape as the air flow sensor. Then placing it in front of the ignition source, it will heat up and give the same reading as the fuel-air mixture of your car.
The gas used in the engine does not matter how hot it is and how much fuel-air mixture it can produce. So a little amount of heat from an open flame can trick the sensor into reading higher than it should be.
But, bypassing or tricking the mass air flow sensor is not desirable because it wastes more money unnecessarily. Moreover, it can lead to severe damage to the engine.
Best Way To Clean Mass Air Flow Sensor?
If your air flow sensor is dirty, you need to clean them as soon as possible. Because such a dirty condition can affect the operation of the engine, here in this segment, we will describe to you the right way to clean the MAF sensor without hampering it.
1. First, locate the mass air flow sensor in the air duct between the air filter box and the throttle body. Then remove the sensor but remember the sensor setup process to fix it again.
2. Then carefully remove the sensor from the air duct and disconnect the electrical connector. After that, spray 10 to 15 spurts of mass air flow sensor cleaner o the wire or plate. Remember not to scrub the plate. Otherwise, it can damage the wire or plate.
3. Lastly, allow the MAF sensor cleaner to dry completely before reinstalling it in the air duct. After completely drying the sensor, follow the setup process and install the sensor.
A MAF sensor monitors the temperature and weight of air entering the engine. So it is necessary to keep the mass air flow sensor clean and protected.
Things To Consider Before Buying MAF Sensor Cleaner
Choosing the MAF sensor cleaner is not that hard. You can easily choose the best mass air flow sensor cleaner if you consider some important factors about it.
So before buying one, you must keep in mind the following facts
Is The MAF Cleaner Safe For Electronic Cleaning?
The mass air flow sensor is a sensitive part of the car. It works on computerizing the car’s air and fuel efficiency that should be accurate. So the cleaners should be capable of electronic cleaning as they work on electronic sectors. If the cleaner is not suitable for electronic cleaning, its liquid ingredients can harm the car’s MAF.
Is The MAF Cleaner Compatible for Grease & Oil Cleaning?
While monitoring the air and fuel injection process, the mass air flow sensor gets dirty with grease and oil layers because of oil leakage. To remove this hard dirt, you need to use a good-quality MAF sensor cleaner.
Air/Fuel Ratio Maintainance
The mass air flow sensor mainly works on fuel efficiency. For this, it must maintain a proper air/fuel ratio in the car engine. But sometimes, the MAF sensor gets damaged when cleaning with different materials. So you should go for cleaners that wipe out all dirt without putting any force in the sensor.
Engine Power Improvement
Always pick the mass air flow sensor that increases the engine’s horsepower. When a MAF sensor is dirty, you will face engine acceleration problems like rough idling, stalling, etc. So the mass air flow sensor cleaner should maintain fuel economy to serve more power to the engine.
Cleaning Time & Drying Time
The mass air flow cleaner spray you choose should wipe out all the dirt within a very short time. If it takes much time to dry, it can damage the electronic parts of the engine. So the cleaner should have a short drying time.
Many people believe that the mass air flow sensor should not be cleaned. But in fact, the MAF sensor should be cleaned regularly with a good-quality mass air flow cleaner.
Final Words
In this article, we have described the aspects and capabilities of the mass air flow sensor cleaner. Hopefully, now you must be eased to choose the best MAF sensor cleaner according to your air flow sensor’s condition. Just be careful in cleaning the MAF sensor properly.
Thank you for reading!
Related Post:
- You can check our review on Jetted Tub Cleaner.
- You also check our guide for Cleaner for Plastic Shower.
Meet Amy Catherine, our expert on all things related to home cleaning and improvement here at Cleaners Array.
With over 10 years of experience in the industry, Amy is a passionate advocate for creating clean and organized living spaces that promote happiness and well-being. She has worked in various roles, from a professional house cleaner to a home decor specialist, and has a deep understanding of the importance of a well-maintained home.
As a writer and editor for Cleaners Array, Amy’s mission is to share her knowledge and expertise with our readers. Her writing covers a wide range of topics, including cleaning tips and hacks, organizing techniques, home decor, and DIY home improvement projects.
We are fortunate to have Amy as a member of our team here at Cleaners Array. Her passion and expertise are invaluable assets to our mission of providing high-quality content and resources to our readers.
